• 828-572-1202
Step Sliders | 2010-2020 5th Gen 4Runner
Step Sliders | 2010-2020 5th Gen 4Runner

Step Sliders | 2010-2020 5th Gen 4Runner

Your Price:$724.00
Build to Order: see Homepage for current lead time
Part Number:4Run5:StepSldr
  • Optional Powder Coating:add 2 additional weeks to above lead time

Choose Options

Fill Plate Design
Diamond Plate [+$165.00]
Dimple Die Up [+$165.00]
Dimple Die Down [+$165.00]
Powder Coating/Finishes
Bare metal - Sanding required prior to painting
Bare metal - Metal is sanded and prepped for immediate painting [+$59.00]
Textured Black [+$155.00]
Other (specify in checkout "Comments") [+$175.00]
Suspension Setup
(2010-2020) 5th Gen 4Runner Step Sliders

With a 0° offset outer tube, our Step Sliders offers a superb entry and exit step for the driver and passengers, while offering the incredible strength and protection of a true BudBuilt rock slider.

Defending the most vulnerable areas of your 4Runner, BudBuilt sliders are engineered to protect both rocker panel and frame alike. As with all BudBuilt products, our sliders are CAD designed by mechanical engineers, with specialties in material science and failure analysis. Combining formal education with decades of engineering and hard-core rock crawling experience, BudBuilt has the proven edge to make products the best they can be.

Designing a true rock slider for the 5th generation 4Runner with optional KDSS created a unique set of challenges. Limited frame rail space, tight body and frame orientation, and limited fastener locations all reduce strength of a traditional slider. But we love a challenge.

Our sliders begin with a rock solid foundation, 1/4" thick, full frame height plate with a 90° lower frame rail design that bolts to existing frame captive nuts with grade 10.9 M8 hardware. 90° frame plates are only as good as the engineer who designed them. Traditionally, the slot style holes on the bottom of the frame plate, allow for slip when the rock slider is holding the weight of the 4Runner. Our attention to detail along with precision CAD designed and Laser cut frame plates give BudBuilt the edge to keep tolerances extremely tight, and greatly reducing movement between the 4Runner's frame and our frame plates.

Building on our frame plates, four (4) 1.75" .120 steel legs with additional reinforcing gussets solidly mount the frame plate to the main tube. Our main tube is constructed of 2" .120 steel tube, providing a rock solid, smooth sliding surface, as well as maximizing ground clearance under your low hanging rocker panel. Continuing from the main tube, the outer tube is constructed of 1.75" .120 steel tube with smooth angles to stand up to constant abuse and not hang up on rocks. Four (4) additional reinforcement 1.5" .120 steel tube legs tie the main and outer tubes together, creating a total of six (6) connecting points. This design further increases rigidity and strength across the entire slider. Total distance from the 4Runner's frame to the outer tube is 16".

  • BudBuilt sliders are designed and manufactured in house from pure American steel. We will never use lower grade Chinese or Indian raw materials
  • Unique mounting system provides unsurpassed rigidity and strength during hard impacts
  • Mounted with massive grade 8 and factory sized grade 10.9 metric hardware and ultra thick washers
  • 0° offset outer tube provides a superb entry step for passengers to enter the cab
  • Sold as a pair (2)
Fitment FAQs:
From the factory, 5th generation 4Runner SR5 and Limited models are sold with one piece plastic rocker panels and side steps. When installing BudBuild sliders, the factory side step will need to be either trimmed or replaced with a Trail edition plastic rocker panel.

5th generation 4Runner Trail and Pro models do not require any trimming or replacement of the plastic rocker panels. Simply bolt on and go

Related Items