All prices are in USD
Bronco ( coming soon )
In Shop Installations
Land Cruiser 1960 - 1984 (40 Series)
Drag Links & Tie Rods
> FJ40 Drag Link, M17RHT/M17LHT
Drag Link pictured on bottom, Tie Rod pictured on top. Drag will NOT come powder coated black.
FJ40 Drag Link, M17RHT/M17LHT
Current Lead Time: 2 weeks BARE METAL
Add to Cart
Email a friend
FJ40 Drag Link, M21RHT/M21LHT
These will replace your wimpy stock drag links with .250 wall 1.250" OD Drawn Over Mandrel tubing.
On pickups and 4Runners, you must upgrade to the beefier M23x1.25 thread FJ-80 rod ends on all versions - Left and Right hand.
The tapers used are all the same on all Toyota trucks and these ends make a huge increase in the strength and size of the ends.
For extra strength, a .120 wall sleeve can be added for an additional $25.
This will effectively give you 3/8 wall of steel and 1.50" OD tie rods.
We make these for most model Toyota trucks and carry replacement ends too.
The Drag Link is the shorter of the two rods in the picture above. Each order contains one rod.
FJ40 Side Panels
FJ40 Tie Rod, M21RHT/M21LHT