Material choices galore!
4th Gen Diff Skid Install Instructions
4th Gen 4Runner Diff Skid Install Instructions
07+Tundra 2 piece Combo Install Instructions
07+ Tundra 2 Piece Combo Install Instructions
BudBuilt Got Armor?
Check Out Our Write Up On MotoIQ Project 5th Gen 4Runner
http://www.motoiq.com/MagazineArticles/ID/3331/Project-5th-Gen-Toyota-4Runner-Part-2--Got-Armor.aspx
Order Cancellation Policy
Bolt-On Tundra Slider Installation
BudBuilt Tundra Slider Install Instructions
FJ Cruiser/4Runner Installation
Built-In Drain door
96-02 4Runner Skid installation
Front IFS skidplate and bellypan for 96-02 4Runners
95-04 Tacoma Front IFS skidplate / bellypan
Front IFS skidplate and bellypan for
95-04 Tacomas
BudBuilt 05+ Tacoma 5 piece skid installation
Budbuilt 05+ Tacoma 5 piece skid installation
Traction Bar Installation Instructions
Thank you for purchasing a BudBuilt Traction Bar for your Toyota!
We appreciate your business and thank you for your support. Please read the entire install guide before you start the install. If you find that there is a part of the install that was unclear, please let us know so we can update this install guide to make it easier for the next person. Also, if you think another picture is needed to make things clearer, please take one and email it to [email protected].
About BudBuilt
BudBuilt was born out of a 4 wheeling engineer's need for some custom parts for his rig. As others saw them while we were wheeling, they wanted them too. I started making a few, then discovered that there was a greater need than I could fill in my spare time making hand crafted parts. We started ordering laser cut parts and purchased the equipment necessary to manufacture them in a quality, professional manner. Now all parts are CAD designed and most laser cut (where appropriate). The fit and finish on our parts is very important to us. We try to supply parts that are ready to bolt on, with no filing or fitting. We understand Toyota's manufacturing tolerances and that some trucks are just "different" but make the best effort to give you a quality, well fitted product.
We also know that many of you are good at wrenching but have no tools or place to fabricate the parts you need for your truck. We are trying to address these issues and make good parts that bolt on and are affordable to the average person. Sometimes, a bolted joint just requires a bit more engineering or material to work as well as a welded one. We also like the ability to remove parts to swap to another vehicle or in case of an accident. It saves having to cut your truck apart to make changes in the future!