FJ40 Drag Link
•These will replace your wimpy stock drag links with .250 wall-
1.250" OD Drawn Over Mandrel tubing.
•On pickups and 4Runners- you must upgrade to the beefier M23x1.25
thread FJ-80 rod ends on all versions- Left and Right hand.
•The tapers used are all the same on all Toyota trucks and these
ends make a huge increase in the strength and size of the ends.
•For those that can break anything or who like suspenders and a
belt- a .120 wall sleeve can be added for an additional $25.
•This will effectively give you 3/8 wall of steel- and 1.50"
OD tie rods.
•We make these for most model Toyota trucks- and carry replacement
•The Drag Link is the shorter
of the two rods in the picture below. Each order contains one rod.
adds one week to the processing of your order.