3/16" Steel - 124 pounds (56kg)
Durable and strong, steel is the workhorse of armor. Ready to take hard hits from rocks and stumps. We recommend 3/16" steel where the application sees occasional to frequent rock impacts. Steel requires powder coating or user-applied paint to prevent rust.
3/16" Stainless Steel - 124 pounds (56kg)
With the same durability and strength of steel, stainless steel has the additional benefit of not requiring paint to prevent rust. Most of our stainless steel users choose this material because with regular rock impacts, even industrial powder coating can be scraped off. Stainless steel offers users the freedom to drag our armor over obstacles and not require prepping and repainting impact areas.
1/8" (3.175mm) Lite Steel - 83 pounds (38kg)
A great, cost effective alternative to aluminum, 1/8" lite steel will protect your drivetrain from damage. We recommend 1/8" lite steel where the application sees regular off-roading, yet very limited potential for regular sharp rock impacts. 1/8" lite steel is more susceptible to denting than 3/16" steel, yet this issue only presents itself during heavy single point impacts, like that of a large sharp rock. 1/8" lite steel requires powder coating or user-applied paint to prevent rust.
1/4" (6.35mm) Aluminum Alloy - 63 pounds (29kg)
Strength without the weight. Our 5052 laser cut aluminum alloy has the same strength levels as our 3/16" steel, but at a faction of the weight. We recommend aluminum where the application sees regular off-roading, yet limited potential for dragging on hard surfaces like rocks. While 1/4" aluminum has the strength to handle heavy rock impacts, it is much more susceptible to galling than steel, when dragged over rocks. Galling results in what looks like fine aluminum shavings by the rock that was dragged down the plate. Another way of thinking about this is by first stating that aluminum has no problem at impacting an obstacle, it's what happens after impact that matters. After impact, if your driving style is to reassess the trail and choose a better line, aluminum is the right choice. If your driving style is to continue on the same line, as in rock crawling applications, we would recommend our 3/16" steel (Rock Armor) systems. Aluminum does not require prepping and repainting impact areas to prevent rust.