1984-1995 4Runner and Pickup Truck single case crossmember
BudBuilt helping you get over it!
•This crossmember combines extreme protection for your underbelly,
while helping you slide over obstacles with ease.
•BudBuilt steel is all laser cut to perfection.
•Our skids are shipped with professional finishing, making them
easy to handle.
•Steel options and powder coating options available in the drop
•Look under BudBuilt Articles for installation instructions.
•This easily bolts up to existing holes in your frame for
convenient installation with new hardware supplied with your skids.
•This single case crossmember weighs 46 pounds.
•NOTE: Most parts are supplied as bare steel- ready for you to
paint the color of your choice. They are sanded- and prepped- usually just
needing a final wipe down with solvent before applying paint. This helps keep
the cost of the parts lower and allows you to fully customize your rig as you
want it. However- powder coating is available in a variety of colors! Please
choose your powder coat options for each piece of your combo
1979 through 1983 Pickup- Single Case Crossmember. Also available with a drivetrain lift if you have a body lift or are willing to cut your floor.
Will work with a newer (84-95) 5 speed trans with the addition of 2 ubolts. In this application- you bolt the front holes of the crossmember in the rear holes in the frame- since the transmission is longer. Then a pair of stock rear u bolts ( or equivalent ) can go up over the frame and thru the rear slots of the crossmember.