• 828-572-1202
2010-2017 5th Gen 4Runner Rock Sliders

2010-2017 5th Gen 4Runner Rock Sliders

Your Price:$525.00
In Stock.
Part Number:SLDR-BO:4R:1016

Choose Options

Outer Tube Design
Straight
Kicker
Fill Plate Design
Powder Coating
Is the 4Runner equipped with KDSS?
No
Yes
Is the 4Runner a Limited model?
No
Yes
(2010-2017) 5th Gen 4Runner Bolt-On Rock Sliders

Defending the most vulnerable areas of your 4Runner, BudBuilt sliders are engineered to protect both rocker panel and frame alike. As with all BudBuilt products, our sliders are CAD designed by mechanical engineers, with specialties in material science and failure analysis. Combining formal education with decades of engineering and hard-core rock crawling experience, BudBuilt has the proven edge to make products the best they can be.

BudBuilt sliders begin with the strongest foundation in the industry, 1/4" thick, that funs the full height of the frame rail. This foundation works in conjunction with additional 3/8" plates that mount on the back and inside of the frame rail. Massive 5/8" grade 8 hardware "sandwich" the outer and inner 3/8" plates to the 4Runner's frame, with additional M8 grade 10.9 metric hardware further secure to existing captive nuts. This industry exclusive design provides an absolutely rock solid surface for the sliders to be built on. We have seen too many frames buckled inward from other sliders that do not distribute the 4Runner's crushing load appropriately.

Five (5) 1.75" .120 steel legs with additional reinforcing gussets solidly mount the frame plate to the main tube. We chose this design for its superior strength qualities over four (4) leg designs, regardless of whether round or square tubing is used. Our main tube is constructed of 2" .120 steel tube, providing a rock solid, smooth sliding surface. The 2" .120 round main tube is far strong enough to support the full weight of the 4Runner under lifting situations, and provides an additional 1" of ground clearance as opposed to 3"x 2" rectangular tubing. Angled 20° upward from the main tube, the outer tube is constructed of 1.75" .120 steel tube with smooth angles to stand up to constant abuse and not hang up on rocks. Four (4) additional reinforcement 1.5" .120 steel tube legs tie the main and outer tubes together, creating a total of six (6) connecting points. This design further increases rigidity and strength across the entire slider. Total distance from the 4Runner's frame to the outer tube is 15.5".

Optional "kicker" can be added free of charge. Our kicker design is accomplished by forming the outer tube to smoothly add 2" of additional protection to the rear of the slider. When driving on tight and narrow trails, the kicker greatly reduces fender impacts from rocks and trees by either kicking the 4Runner away from danger, or preventing the 4Runner from getting too close to an obstacle to begin with. BudBuilt's kicker, combined with our massive 20º upward angle, provides massive ground clearance and protection where you need it most. From the 4Runner's frame to the furthest point on the kicker is 17.5".

  • BudBuilt sliders are designed and manufactured in house from pure American steel. We will never use lower grade Chinese or Indian raw materials
  • Unique mounting system provides unsurpassed rigidity and strength during hard impacts
  • Mounted with massive grade 8 and factory sized grade 10.9 metric hardware and ultra thick washers
  • 20º upward outer tube angle provides incredible ground clearance and protection
  • Sold as a pair (2)


•These work with Trail Edition models.

•Installation for SR5 and Limited Edition will require you to remove or trim your rocker panels.

•The Bump Out Regular sliders weigh 54 pounds each for a total of 109 pounds for the set. Tread plating adds 5 pounds for partial and 10 pounds for full tread to each slider.

 

•ALL SLIDERS ARE SOLD IN PAIRS (2).

Sliders
strong>
The second image shows the optional "partial" tread plating available. The "legs" in this picture are for the 2010 4 Runner.
10_TE_4RUN_SLIDERS_2
The third image shows the optional "full" tread plating available. The "legs" in this picture are also for the 2010 4 Runner.
IMG_7415
The fourth image shows the difference between our regular sliders and our beefy sliders. (Regular tubing on the left and beefy on the right)
IMG_7452

Related Items