• 828-572-1202
2005-2015 Tacoma Rock Sliders

2005-2015 Tacoma Rock Sliders

Your Price:$525.00
In Stock.
Part Number:Taco 05-15:RockSldr

Choose Options

Outer Tube Design
Straight
Kicker
Fill Plate Design
Powder Coating
Cab and Bed Configuration
Access cab and Double cab Shortbed
Double cab Longbed
Regular cab
(2005-2015) Tacoma Bolt-On Rock Sliders

Defending the most vulnerable areas of your Tacoma, BudBuilt sliders are engineered to protect both rocker panel and frame alike. As with all BudBuilt products, our sliders are CAD designed by mechanical engineers, with specialties in material science and failure analysis. Combining formal education with decades of engineering and hard-core rock crawling experience, BudBuilt has the proven edge to make products the best they can be.

BudBuilt sliders begin with the strongest foundation in the industry, 3/8" thick, 5.6' long solid steel plate that runs the entire height of the frame rail. This foundation works in conjunction with additional 3/8" plates that mount on the back and inside of the frame rail. Massive 5/8" grade 8 hardware "sandwich" the outer and inner 3/8" plates to the Tacoma's frame, with additional M8 grade 10.9 metric hardware further secure to existing captive nuts. This industry exclusive design provides an absolutely rock solid surface for the sliders to be built on. We have seen too many frames buckled inward from other sliders that do not distribute the Tacoma's crushing load appropriately.

Five (5) 1.75" .120 steel legs with additional reinforcing gussets solidly mount the frame plate to the main tube. We chose this design for its superior strength qualities over four (4) leg designs, regardless of whether round or square tubing is used. Our main tube is constructed of 2" .120 steel tube, providing a rock solid, smooth sliding surface. The 2" .120 round main tube is far strong enough to support the full weight of the Tacoma under lifting situations, and provides an additional 1" of ground clearance as opposed to 3"x 2" rectangular tubing. Angled 20° upward from the main tube, the outer tube is constructed of 1.75" .120 steel tube with smooth angles to stand up to constant abuse and not hang up on rocks. Four (4) additional reinforcement 1.5" .120 steel tube legs tie the main and outer tubes together, creating a total of six (6) connecting points. This design further increases rigidity and strength across the entire slider. Total distance from the Tacoma's frame to the outer tube is 15.5".

Optional "kicker" can be added free of charge. Our kicker design is accomplished by forming the outer tube to smoothly add 2" of additional protection to the rear of the slider. When driving on tight and narrow trails, the kicker greatly reduces fender impacts from rocks and trees by either kicking the Tacoma away from danger, or preventing the Tacoma from getting too close to an obstacle to begin with. BudBuilt's kicker, combined with our massive 20º upward angle, provides massive ground clearance and protection where you need it most. From the Tacoma's frame to the furthest point on the kicker is 17.5".

  • BudBuilt sliders are designed and manufactured in house from pure American steel. We will never use lower grade Chinese or Indian raw materials
  • Unique mounting system provides unsurpassed rigidity and strength during hard impacts
  • Mounted with massive grade 8 and factory sized grade 10.9 metric hardware and ultra thick washers
  • 20º upward outer tube angle provides incredible ground clearance and protection
  • Sold as a pair (2)