(0) Item Hello, Guest
10-17 5th Gen 4Runner Sliders - Bump Out, Regular

10-17 5th Gen 4Runner Sliders - Bump Out, Regular

review
5
0
5
Your Price: $525.00
Part Number:SLDR-BO:4R:1016

Customize Your Part:

Optional Powder Coating
Optional Tread Plating
Model of Vehicle
Special Handling Fee

2010-2017 5th Gen 4Runner Sliders – Bump Out & Regular

BudBuilt helping you get over it!

•They bolt to the factory holes with the thickest plates in the industry ( 3/8") and .120 wall tubing.

•These protect your frame from bowing or cupping when the weight of your truck is carried by the sliders. 


•There is a brace on 3 of the four legs to helps support the weight. 


•The stock emergency brake lines fit with no modifications. 


•The 2 styles allow you to choose the look and protection that you desire. 

 

•They are used for a helpful step up into the vehicle also.


•They come with ultra-thick washers and grade 10.9 metric hardware to attach them. 

•As always powder coating is available, it does add an additional week to delivery time.

•Partial and whole tread plating is also available.


•These work with Trail Edition models. 


•Installation for SR5 and Limited Edition will require you to remove or trim your rocker panels.

 

•The Bump Out Regular sliders weigh 54 pounds each for a total of 109 pounds for the set. Tread plating adds 5 pounds for partial and 10 pounds for full tread to each slider.

 

•ALL SLIDERS ARE SOLD IN PAIRS (2).

Sliders
strong>
The second image shows the optional "partial" tread plating available. The "legs" in this picture are for the 2010 4 Runner.
10_TE_4RUN_SLIDERS_2
The third image shows the optional "full" tread plating available. The "legs" in this picture are also for the 2010 4 Runner.
IMG_7415
The fourth image shows the difference between our regular sliders and our beefy sliders. (Regular tubing on the left and beefy on the right)
IMG_7452

5 Stars
Perfect for my needs
This is my first time purchasing a "custom built" product for a truck. Normally, I just get the mass produced stuff out there and bolt it on. I got the sliders for my 2017 4Runner before it was even delivered to me. I had chosen Bud because he was local and that meant no shipping costs for me. I also had heard great things about his products. I was not let down at all. They look great on my 4Runner, and function perfectly as steps to get into the seats and to the roof. The lines compliment the proportions of the TRD Pro, which I was worried about having chosen the bump out version. The bump outs were not too far out from the track of the truck, and really look like they belong there. Great job to everyone at Budbuilt....especially Jackie for meeting me out there on an Saturday to pick them up.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Winston Salem, NC. on 1/28/2017
5