2010-2017 5th Gen 4Runner Sliders - Bump Out & Beefy
BudBuilt helping you get over it!
•They bolt to the factory holes with the thickest plates in the
industry ( 3/8") and .120 wall tubing.
•These protect your frame from bowing or cupping when the weight
of your truck is carried by the sliders.
•There is a brace on 3 of the four legs to helps support the weight.
•The stock emergency brake lines fit with no modifications.
•The 2 styles allow you to choose the look and protection that you
•They are used for a helpful step up into the vehicle also.
•They come with ultra-thick washers and grade 10.9 metric hardware to attach
•As always powder coating is available, it does add an additional week to
•Partial and whole tread plating is also available.
•These work with Trail Edition models.
•Installation for SR5 and Limited Edition will require you to remove or trim
your rocker panels.
•The Bump Out Beefy sliders weigh 95 pounds each for a total of
190 pounds for the set. Tread plating adds 5 pounds for partial and 10 pounds
for full tread to each slider.
•ALL SLIDERS ARE SOLD IN PAIRS (2).